Rigging Dimensions
The four foretriangle measurements sailmakers need to quote a new suit.
I ?
37.50 ft
J ?
11.50 ft
P ?
41.50 ft
E ?
13.80 ft
Sail Area Breakdown
Calculated from rigging dimensions. Use these as your starting point when ordering a new suit.
| Sail | Area (ft²) | Area (m²) |
|---|---|---|
| MainsailP × E ÷ 2 | 286.4 | 26.6 |
| 100% ForetriangleI × J ÷ 2 | 215.6 | 20.0 |
| 150% GenoaTypical light-air headsail | 323.4 | 30.0 |
| Storm Jib~50% of foretriangle, high-cut | 107.8 | 10.0 |
| Symmetric SpinnakerEstimated from I, J | 776.3 | 72.1 |
| Total Working Sail AreaMain + 100% foretriangle | 502.0 | 46.6 |
Foretriangle Diagram
Drawn to scale from published I, J, P, E measurements — Fractional Sloop · Gary Mull/Jim Donovan design
Performance Ratios
How the Humboldt 30 carries its sail relative to its displacement.
SA/D Ratio
27.4
Performance-oriented — carries a lot of sail for its weight.
Mast Height (above DWL)
— ft
Air draft not published — measure yours before any bridge transit.
Ballast Ratio
44%
Stiff enough to carry a 150% genoa comfortably into moderate breeze.
Typical Sail Inventory
What Humboldt 30 owners usually carry and what's worth buying used vs. new.
Mainsail 286.4 ft²
Dacron cross-cut with 2 reef points is standard. Full-batten is a common upgrade.
Replace new
150% Genoa 323.4 ft²
The workhorse headsail. Most boats have one on a furler by now.
Replace new
110% Working Jib ~237 ft²
Good secondary sail for breezy days — used market is strong.
Buy used
Storm Jib 107.8 ft²
Bright orange recommended. Rarely used, hard to justify new.
Buy used
Asymmetric Spinnaker ~776 ft²
Popular downwind upgrade — easier than symmetric for shorthanded sailing.
Optional
Replacement Cost Estimator
Get a rough price range for a new mainsail and genoa for the Humboldt 30 — Dacron, laminate, and cruising performance tiers.