Rigging Dimensions
The four foretriangle measurements sailmakers need to quote a new suit.
I ?
18.80 ft
J ?
6.66 ft
P ?
20.00 ft
E ?
7.75 ft
Sail Area Breakdown
Calculated from rigging dimensions. Use these as your starting point when ordering a new suit.
| Sail | Area (ft²) | Area (m²) |
|---|---|---|
| MainsailP × E ÷ 2 | 77.5 | 7.2 |
| 100% ForetriangleI × J ÷ 2 | 62.6 | 5.8 |
| 150% GenoaTypical light-air headsail | 93.9 | 8.7 |
| Storm Jib~50% of foretriangle, high-cut | 31.3 | 2.9 |
| Symmetric SpinnakerEstimated from I, J | 225.4 | 20.9 |
| Total Working Sail AreaMain + 100% foretriangle | 140.1 | 13.0 |
Foretriangle Diagram
Drawn to scale from published I, J, P, E measurements — Fractional Sloop · Ron Holder design
Performance Ratios
How the Holder 17 carries its sail relative to its displacement.
SA/D Ratio
24.4
Performance-oriented — carries a lot of sail for its weight.
Mast Height (above DWL)
— ft
Air draft not published — measure yours before any bridge transit.
Ballast Ratio
36%
Typical cruising ballast — balanced stability underway.
Typical Sail Inventory
What Holder 17 owners usually carry and what's worth buying used vs. new.
Mainsail 77.5 ft²
Dacron cross-cut with 2 reef points is standard. Full-batten is a common upgrade.
Replace new
150% Genoa 93.9 ft²
The workhorse headsail. Most boats have one on a furler by now.
Replace new
110% Working Jib ~69 ft²
Good secondary sail for breezy days — used market is strong.
Buy used
Storm Jib 31.3 ft²
Bright orange recommended. Rarely used, hard to justify new.
Buy used
Asymmetric Spinnaker ~225 ft²
Popular downwind upgrade — easier than symmetric for shorthanded sailing.
Optional
Replacement Cost Estimator
Get a rough price range for a new mainsail and genoa for the Holder 17 — Dacron, laminate, and cruising performance tiers.