Home/ Boats/ Etap Yachting/ Etap 35I/ Performance
Performance

Etap 35I Performance

How the Etap 35I performs on the water — racing handicap, sail-carrying power, stability and comfort.

+ Add to Compare

The Etap 35I is with acceptable motion comfort for coastal passages.

Hull Speed

The theoretical displacement-mode speed limit — determined by waterline length, not engine or sail power.

7.2 kts
A displacement hull pushes a bow wave whose speed is limited by the waterline length. With a waterline of 29.0′, the Etap 35I tops out around 7.2 knots in displacement mode — after that, the bow wave outruns the hull and resistance climbs steeply.
1.34 × √29.0′ LWL = 7.2 kts

Performance Ratios

Racing handicap, sail-carrying power, stability and comfort — and what each one actually tells you about a day on the water.

Ballast / Displacement
33.5%
Typical cruising ballast — balanced stability and motion underway.
Displacement / Length
210
Moderate — a good balance of speed and load-carrying ability.
Comfort Ratio
22.2
Acceptable coastal comfort — fine for weekends, notice the chop offshore.
Capsize Screening
2.05
Above the 2.0 offshore threshold — best suited for coastal and protected waters.
Hull Speed
7.2kts
S# (Speed Number)
2.5
Pounds/Inch Immersion
1lbs
Weight needed to sink the hull one inch — loading sensitivity.

Motion & Offshore Suitability

Two ratios that matter most when you're planning passages — how the boat feels in a seaway, and whether the hull geometry is suitable for open ocean.

Comfort Ratio
22.2
Acceptable coastal comfort — fine for weekends, notice the chop offshore.
Under 20 — Snappy, racing motion
20–30 — Acceptable coastal
30–40 — Good offshore comfort
Over 40 — Very comfortable offshore
Capsize Screening Formula
2.05
Above the 2.0 offshore threshold — best suited for coastal and protected waters.
Under 2.0 — Acceptable for offshore
Over 2.0 — Coastal / protected waters

PHRF Fleet Position

Where the Etap 35I sits on the PHRF handicap spectrum — lower numbers mean faster boats.

Racer 0–90
Cruiser/Racer 90–150
Cruiser 150–210
Jeanneau One Design 35 84s/nm
Ericson 34 2 144s/nm
Sadler 34 173s/nm

How It Compares

Side-by-side with the boats most often cross-shopped against the Etap 35I.

Etap 35I Bavaria 35 Exclusive Ericson 34 2 Etap 34S Jeanneau One Design 35 Sadler 34
Dimensions
LOA 34.8 34.9 34.8 34.9 34.8 34.8
LWL 29.0 29.4 29.0 29.8 29.7 27.8
Beam 11.5 11.3 11.3 11.6 11.5 10.8
Displacement 11 11 13 10 8 12
Ballast 3 3 5 3 2 5
Sail Area 769 595 680 588 496
Performance
PHRF 144 84 173
SA/Disp 24.6 17.3 23.5 23.5 14.6
Bal/Disp 33.5 35.3 40.0 32.0 34.1 39.1
Comfort 22.2 22.1 25.8 19.0 15.5 28.0
Capsize 2.05 2.02 1.93 2.15 2.29 1.84
Hull Speed 7.2 7.3 7.2 7.3 7.3 7.1